Nagys Audio High End Audio RCA Interconnects, Order Form, Nagys Audio, Pay Pal, Credit Card, Mail, Digital, Coax, Goldmund, Swiss, Analog, Jitter, Power, Cable, Cord, RCA, 75ohm 75 ohm, Kaunas, Lithuania, Made in U.S.A., Mimesis 3, Lineal, Speaker, Wire, Twisted Pair, 12 AWG, Silver Plated, Copper, Braided, Shielded, Wide Bandwidth, Aerospace, Audiophile, XLR, Mic, Microphone, Low Noise, DIY

 
 
 
   
 
 
 
  GOLDMUND A1, A2, S1, and M1 Modules (exact replicas) 
 
 
Power Cable, Manual, Nagys Audio, Goldmund, Mimesis 3, Mimesis 2, Mimesis 2+, Mimesis 9.2, Mimesis 8.5, Mimesis 9, Mimesis 9+, Mimesis 7, Mimesis 6, Mimesis 7.5, SRI, SRM, SRI2, SRP, SRP2, SRM2, Telos, Meta Research, Mimesis 28, Mimesis 29, Mimesis 29+, Clone, Kit, Schematic, Aerospace, Engineering, Circuit, MOSFET, MOSFETS, Jfet, Jfets, 2N5564, 2N5565, 2N5566, 2SK134, 2SJ49, Hitachi, Magnatec, BUZ900, BUZ901, BUZ905, BUZ906, A1 Module, A2 Module, Top Secret, Swiss, Made, Engineered, Made in U.S.A., Meta, Ensemble, PA-1, Reference, Profundo, Pawel Acoustics, Switzerland, Topology, Stenheim, Analogue, Analogues, Logos, Mini, Logos1, Apologue, Apologues, Dialogue, Dialogues, Super, Gorlich, Goerlich, Zellaton, Vishay, Philips, Toridal, DIY, Nelson Pass, Transformer, Hammond, Plitron, Amplimo, Avel, Antek, Solid State, Amplifier, Amp, Design, Heatsink, Extruded, SRTT, Cones, Vibration, Mechanical, Grounding
 
 
  There are many users who have broken GOLDMUND equipment and need the 
  A1, A2, S1, or M1 module(s) to complete the repairs. GOLDMUND no longer sells 
  these modules and they're virtually impossible to find on the used market. Above
  image is of the actual replica. Please read all of the information bellow. 

  (Note: We offer a service to repair any and all vintage GOLDMUND components.  
  We have a combined 50+ years of experience in working with GOLDMUND 
  equipment. Please contact us for more information.)

  (Note: A20 modules are not available.)

  Pricing

  - A1 Module $250 each
  - A2 Module $250 each (we do not offer the gold plated brass cover)
  - S1 Module $250 each (part of Mimesis 3's protection circuit)
  - M1 Module $250 each (phono input circuit as found in PH2, PH7, 2PH, and 7PH)

  - No PayPal Fee

  Payment Options

  - An email will be sent (with tracking number, if 
    applicable) when order has shipped

  - Money Orders
  - Cashier's Checks
  - Personal Checks (must clear before order is shipped)
  - Make checks payable to Norbert Nagys

  To Order Via PayPal

    Paypal, Pay Pal, Manual, Nagys Audio, Goldmund, Mimesis 3, Mimesis 2, Mimesis 2+, Mimesis 9.2, Mimesis 8.5, Mimesis 9, Mimesis 9+, Mimesis 7, Mimesis 6, Mimesis 7.5, SRI, SRM, SRI2, SRP, SRP2, SRM2, Telos, Meta Research, Mimesis 28, Mimesis 29, Mimesis 29+, Clone, Kit, Schematic, Aerospace, Engineering, Circuit, MOSFET, MOSFETS, Jfet, Jfets, 2N5564, 2N5565, 2N5566, 2SK134, 2SJ49, Hitachi, Magnatec, BUZ900, BUZ901, BUZ905, BUZ906, A1 Module, A2 Module, Top Secret, Swiss, Made, Engineered, Made in U.S.A., Meta, Ensemble, PA-1, Reference, Profundo, Pawel Acoustics, Switzerland, Topology, Stenheim, Analogue, Analogues, Logos, Mini, Logos1, Apologue, Apologues, Dialogue, Dialogues, Super, Gorlich, Goerlich, Zellaton, Vishay, Philips, Toridal, DIY, Nelson Pass, Transformer, Hammond, Plitron, Amplimo, Avel, Antek, Solid State, Amplifier, Amp, Design, Heatsink, Extruded, SRTT, Cones, Vibration, Mechanical, Grounding

    Email: invictus005@hotmail.com

  - Please enter module quantity and type in PayPal's note section

  - Shipping within United States ($8): USPS Priority Mail
    Flat Rate Small Box

  - International orders will be shipped via USPS Priority Mail
    Flat Rate Small Box ($34)
  GOLDMUND Module Construction

  - 100% original GOLDMUND schematic
  - All 100% original GOLDMUND parts (NPN/PNP transistors, JFETs, 
    diodes, capacitors, 24-pin DIN bases, covers, resistors, etc.)
  - All parts are from identical manufacturers which were used by
    GOLDMUND and of identical model/type 
  - All parts are sourced from reputable U.S. based distributors
  - Potted with the same thermal circuit potting resin which was
    used originally by GOLDMUND
  - Direct drop-in, will fit in existing GOLDMUND 24-pin socket(s)
  - Pins are labeled on top of the module, proper orientation is
    critical during installation, failure to do so will result in 
    destruction of equipment
  - Offset must be checked/adjusted after installation
  - If A1 module is replaced with A2, bias resistor (270 Ohm -
    330 Ohm) must be checked, each MOSFET device should be
    biased to 80mA and idle heat sink temperature must be at 55
    degrees Celsius after full warm up period (at least 24 hours)
  - A2 modules will come with A1 covers, not the gold plated brass
    with the GOLDMUND logo, however, internally they are identical
  - Works with the following GOLDMUND components:

    Mimesis 3
    Mimesis 2
    Mimesis 2+
    Mimesis 6
    Mimesis 6.2
    Mimesis 6.5
    Mimesis 7
    Mimesis 7.1
    Mimesis 7.5
    Mimesis 7PH
    Mimesis 2PH
    Mimesis 7PH
    Mimesis 2PH
    Mimesis 9
    Mimesis 9+
    Mimesis 9.2
    Mimesis 9.4
    Mimesis 9.5
    Mimesis 8
    Mimesis 8.2
    Mimesis 8.4
    Mimesis 8.5
    Mimesis SRI
    Mimesis SRP
    Mimesis SRP 2
    Mimesis 27
    Mimesis 27+

  Burn-In Period

  - All GOLDMUND Modules have been tested and pre burned-in at the
    factory. However, as with any high end audio components, it may
    take up to 50 hours of listening to music to reach the optimal sonic
    results

  Warranty

  - No warranty is implied

  Below are a couple of pictures of the original GOLDMUND A1 Modules 
  un-potted and in use in the legendary GOLDMUND Mimesis 7.5 preamplifier 

                        

 

 

 

 
 
Copyright © 2017 NAGYS AUDIO Inc. All rights reserved.